P0D35
Hybrid/EV Battery System Current Unstable
P0D35 flags a battery system current that swings more than the operating state explains, for example rapid changes while the requested power is steady. No manufacturer publishes set conditions for this code. Possible sources are a loose high-voltage connection or a chattering contactor that briefly interrupts the flow, a consumer such as a compressor or heater that cycles abnormally, a current sensor with an intermittent signal, or a controller that oscillates in its regulation. Hitachi Astemo's patent on battery current detection compares several current values and treats a large spread between them as a fault, which illustrates how such instability can be caught. The sensor's own sporadic code is P0AC3; P0D35 concerns the current flow. CARB requires battery system performance monitoring. Power may be cut back.
Possible causes
- Loose high-voltage connection or chattering contactor medium
- Current sensor or its wiring with intermittent signal medium
- HV consumer (compressor, heater) cycling abnormally low
Symptoms
- Hybrid system warning, possibly intermittent
- Power reduction or jerky electric drive
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0D35
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.