P0D34
Hybrid/EV Battery System Current
P0D34 is the general code for the current flowing through the high-voltage battery system as a whole. The pack current sensor codes P0ABF-P0AC3 judge the sensor signal; this group judges whether the current itself fits the operating state. No manufacturer documents P0D34 publicly, and its set conditions are not published. A plausible reading is a current that does not match what the inverters, the charger and the DC/DC converter should draw, or current flow while the contactors are open. Ford's patent on in-range current sensor faults shows one way to check: amp-hours counted from the measured current are compared with the shift in charge level derived from the open-circuit voltage. CARB requires battery system performance to be monitored. Unstable, low and high current are P0D35, P0D36 and P0D37.
Possible causes
- Battery current sensor reads wrong but within range medium
- Battery controller software or calibration medium
- Unexpected current path in the HV system (contactor, consumer) low
Symptoms
- Hybrid system warning or MIL
- Reduced electric power or charging restrictions
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0D34
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.