OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0D33

DC/DC Converter Current High

P0D33 says the DC/DC converter carries more current than its limit. The converter links the high-voltage or 48 V system with the 12 V network; an internal short in the power stage, a shorted 12 V cable or consumer, or a failed output stage can push the current beyond what the converter accepts, and it then switches off to protect itself. LKQ Electriq, a high-voltage component remanufacturer, reports P0D33 together with a charging system fault message on Land Rover 48 V mild hybrids (Defender, Evoque, Discovery Sport, Velar); in its bench tests the cause was usually a fault on the converter's internal circuit board, not the vehicle wiring. No manufacturer publishes test limits. The 12 V battery stops being charged and the car may later fail to start. Overheating is P0D32.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / 33

Possible causes

  • Internal circuit board fault in the converter (Land Rover MHEV) high
  • Short in a 12 V cable or consumer on the converter output medium
  • Damaged high-voltage or 48 V supply cable low

Symptoms

  • Charging system fault message
  • 12 V battery not charged, later no start
  • Electrical consumers switched off

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0D33

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication