P0D32
DC/DC Converter A Over Temperature
P0D32 means DC/DC converter A, which supplies the 12 V network from the high-voltage battery, has become too hot. Unlike the sensor codes P0C38-P0C3C, the reading itself is trusted; the temperature is the problem. Honda names P0D32 in bulletin 26-025 for 2023-2025 Accord Hybrid models alongside other power control unit overheating codes such as P0A3C and P0A3E: road debris can get past a weak guard and damage the PCU radiator, coolant escapes, and several warning lights appear with reduced hybrid performance. The remedy is a new guard and, if the radiator leaks, a new radiator. Low coolant, a weak electronics coolant pump, a clogged radiator or trapped air are the usual causes. The converter cuts or stops its output, so the 12 V battery can run flat.
Possible causes
- Coolant loss in the power electronics circuit, e.g. damaged PCU radiator (Honda) high
- Weak electronics coolant pump or air in the cooling circuit medium
- Radiator clogged or airflow restricted medium
- Internal converter fault with excess heat low
Symptoms
- Several warning lights including MIL
- Reduced hybrid system performance
- 12 V battery discharges, charging warning
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0D32
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.