P0D31
Drive Motor A Inverter Voltage Sensor A Circuit Intermittent/Erratic
P0D31 covers a voltage signal from the drive motor A inverter that drops out or jumps for brief moments without staying out of range long enough for P0D2F or P0D30. No manufacturer documents this code publicly. Related checks show the time scale: Mitsubishi rates the same sensor as failed only after 0.16 to 0.3 s outside its window, so shorter glitches need a separate test. Denso describes comparing the measured inverter input voltage with a value estimated from the motor control loop, which also exposes a signal that jitters. Likely triggers are a loose low-voltage connector at the inverter, a chafed harness, or a sensing circuit in the power electronics that fails with heat or vibration. CARB requires such input signals to be checked for circuit faults and rationality. The hybrid warning may come and go.
Possible causes
- Loose or corroded low-voltage connector at the inverter high
- Chafed signal wiring with intermittent contact medium
- Sensing circuit in the power electronics fails with heat or vibration medium
Symptoms
- Hybrid system warning that comes and goes
- Brief power loss or jerky electric drive
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0D31
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.