P0D30
Drive Motor A Inverter Voltage Sensor A Circuit High
P0D30 is the high-side partner of P0D2F: the inverter voltage signal of drive motor A stays near its upper limit. Mitsubishi checks it on the 2018 Outlander PHEV with the front motor unit supplied at 8 to 16 V; a sensor output above 4.7 V, which stands for roughly 440 V, for 0.3 s sets the code. The manual first asks whether the rear motor unit also stores P0DA6, because then a genuine overvoltage from the battery or the HV circuit is more likely than one bad sensor; fuse and cabling come next, the power drive unit last. The 2023 model uses 4.05 V at capacitor 1 for 0.16 s and turns on the MIL. A short to the sensor supply is the classic cause on the sensing side. Real overvoltage has its own code, P0C79.
Possible causes
- Voltage sensing in the power drive unit shorted to supply medium
- Real overvoltage from battery or HV circuit (both motor units report) medium
- Loose or damaged high-voltage connection low
Symptoms
- MIL and hybrid system warning
- Electric drive switched off or reduced
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0D30
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.