P0D2E
Drive Motor A Inverter Voltage Sensor A Circuit Range/Performance
P0D2E means the inverter voltage reading of drive motor A is electrically valid but disagrees with other measurements of the same high-voltage bus. Mitsubishi shows the logic for the 2023 Outlander PHEV: with voltage control active, the power drive unit compares capacitor 1 with the rear motor unit and with both channels of capacitor 2; a gap of 100 V or 50 V held for 0.2 s sets the code, and an implausible PWM period counts too; the MIL comes on. Mercedes lists P0D2E00 in the battery management of its 2024 P3 plug-in hybrids (series 206, 223, 254, 290) when the high-voltage belt starter-alternator has failed and the engine no longer starts. So a drifting sensor and a real fault elsewhere on the bus are both possible. Hard circuit faults are P0D2D, P0D2F and P0D30.
Possible causes
- Voltage sensing in the power drive unit drifts or reads wrong medium
- Fault in another HV component, e.g. belt starter-alternator (Mercedes) medium
- High resistance or loose high-voltage connection between modules low
Symptoms
- MIL and hybrid system warning
- Engine will not start, only electric driving possible (Mercedes)
- Reduced drive power
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0D2E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.