OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0D2C

Charge Status Indicator A Control Circuit/Open

P0D2C is set for a fault in the driver circuit of charge status indicator A, the light that tells the driver whether the car is charging. On the Chevrolet Volt that light is part of the diagnosis itself: bulletin PIP4905E has technicians watch whether the charge indicator on the instrument panel stays steady green. GM tests the driver for a ground short while the LED is commanded on and for a short to battery or an open circuit while it is off, needing 40 bad readings out of 50 at 100 ms. Volt 2011 and 2012 set the code as Type B, with the MIL on the second trip; the 2016 ELR tables use One Trip Type A. A broken wire, a failed LED or a corroded plug are typical. Charging still works, but the owner loses the visual confirmation. A second indicator B uses P0DE5.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / 2C

Possible causes

  • Broken wire or corroded connector to the indicator high
  • Failed charge status LED medium
  • Faulty LED driver in the controlling module low

Symptoms

  • Charge status light dark or permanently lit
  • MIL, depending on model after one or two trips

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0D2C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication