P0D2B
Control Pilot Indicator Control Circuit/Open
P0D2B concerns the driver circuit of the control pilot indicator, a lamp or LED with which the vehicle signals the state of the pilot connection to the charging station. The code covers the lamp's own wiring, not the pilot signal itself. GM monitors it on the Chevrolet Volt and Cadillac ELR in two cases: a short to ground is detected while the LED is commanded on (12 bad readings out of 15), a short to battery or an open circuit while it is off and the cord is plugged in (40 out of 50), each sampled every 100 ms. The 2011 and 2012 Volt treat it as Type B with MIL after two trips; the 2016 ELR tables list One Trip Type A. Wiring damage, a failed LED or a bad connector are the likely causes. Charging itself usually continues. Faults of the pilot line are P0CF3 and P0CF4.
Possible causes
- Damaged wiring or loose connector to the indicator high
- Failed indicator LED medium
- Faulty LED driver in the controlling module low
Symptoms
- Indicator stays dark or lit regardless of charging state
- MIL, depending on model after one or two trips
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0D2B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.