P0D22
Battery Charger A Output Current Performance
P0D22 means the on-board charger does not deliver the high-voltage current it was asked for. GM's Volt compares actual and desired current in constant-current mode against a table: 150 of 300 samples set it in 2011, One Trip Type A; from 2014 a second part also catches a charger that was switched on, with more than 201 V commanded, but never enabled its output after 6 s. Mitsubishi's Outlander PHEV stops charging when target and actual differ by 3 A or more for 3 s. GM bulletins cite P0D22 with MIL and no charge on the 2011 and 2013 Volt (HPCM2 updates) and, in PIP6048, on the Lyriq, Optiq, Blazer EV and Equinox EV during level 2 charging, where reprogramming the BECM comes first. Voltage deviations belong to P0D20/P0D21, a shorted output to P0D23.
Possible causes
- Charge control software in the hybrid or battery control module (GM PIP bulletins) high
- Internal fault in the on-board charger medium
- Faulty output current measurement low
Symptoms
- Vehicle does not charge or charging stops
- MIL on after a charge session ends
- Problem shows mainly on AC level 2 stations
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0D22
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.