OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0D18

Battery Charging System A High Voltage Interlock Circuit High

P0D18 flags a charging HVIL signal that sits too high. On the Chevrolet Volt and Cadillac ELR GM tests the loop in two states: with the 5 V source off, a sensed level above 24 % of reference (5 of 6 samples in 2011, 5 of 8 for 2014 and ELR), and with it on, a level above 44 % (4 of 6), set the code as Type A, MIL after one trip. A high value may point to a break or added resistance in the loop or a short to a voltage. Polestar stores P0D1800 in the BECM of the 2021–2023 Polestar 2 with a propulsion warning and resolves it with BECM software 2.10 (TJ 36713). Kia lists P0D1812 for the 2023 Niro EV among the codes that lead to ICCU replacement (bulletin 298). The low case is P0D17, the open loop P0D15.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / 18

Possible causes

  • High resistance or partial break in the interlock loop medium
  • Battery module software needing an update (Polestar 2) medium
  • Faulty integrated charging unit (Kia Niro EV ICCU) medium
  • Interlock wire shorted to a voltage source low

Symptoms

  • Malfunction indicator lamp (GM Type A)
  • Propulsion or high-voltage warning in the cluster
  • Slow or no AC charging

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0D18

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication