P0D12
Battery Charging System Negative Contactor A Control Circuit Range/Performance
P0D12 points to a control circuit of negative charging contactor A that is electrically intact yet implausible: current, voltage or switching response do not fit the command. No manufacturer documents P0D12 publicly. GM's closest test is P0D11 on the Chevrolet Volt and Cadillac ELR, comparing driver command with line state and coil current, and CARB requires plug-in vehicles to monitor charging components for rationality faults in addition to circuit faults. Corroded terminals, a coil whose resistance has shifted and poor grounds are the usual suspects. Opens fall under P0D11, low and high signals under P0D13/P0D14, the positive side under P0D0B. Charging may drop out or refuse to begin.
Possible causes
- Contact resistance or corrosion in the control circuit connectors high
- Contactor coil with shifted resistance medium
- Poor ground of the control module or coil return low
Symptoms
- Charging sessions fail sporadically
- Stored code, possibly with a charging system warning
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0D12
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.