P0D0F
Battery Charging System Negative Contactor A Stuck Closed
P0D0F flags negative charging contactor A as stuck closed: it still conducts after the open command, usually through welded contacts or a misjudged state. Ford stores it in the BECM of the 2021–2022 Mustang Mach-E together with main-contactor codes such as P0AA1 and P0AA4; bulletins 22-2178 and 23-2020 replace the high-voltage battery junction box and reprogram the BECM, and a flat 12 V battery or the Stop Safely Now warning may accompany it. Stellantis lists P0D0F-00 for the Grand Cherokee 4xe with a MIL, partly a false alarm, and cures it with BPCM software (0817922, 08-006-25). GM sets it together with P0D08 on the 2023 Lyriq after an interrupted AC session (23-NA-096). A Toyota patent checks such sticking via charge-port voltage. The positive side is P0D08, the opposite fault P0D10.
Possible causes
- Faulty high-voltage battery junction box with the charging contactors (Ford Mach-E) high
- Battery module software misjudging the contactor (Stellantis 4xe, GM Lyriq) medium
- Welded contactor contacts medium
Symptoms
- Malfunction indicator lamp or wrench lamp
- Stop Safely Now message or no ready mode (Ford)
- Discharged 12 V battery
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0D0F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.