P0D0E
Battery Charging System Negative Contactor A Circuit
P0D0E is the general circuit code for negative contactor A of the charging system, which connects the minus side of the charging path – from DC inlet or on-board charger – to the traction battery. It is used when the module sees an electrical fault on that contactor that it does not classify more precisely. No manufacturer documents P0D0E publicly. A GM patent on battery disconnect diagnosis shows separate contactor pairs for fast and slow charging and judges each by its coil current, and CARB requires plug-in vehicles to monitor charging components. Welding or failure to close on the negative side are P0D0F/P0D10, driver faults P0D11–P0D14, the positive side P0D07, the main pack contactors P0AA3 ff. In most cases only charging is affected.
Possible causes
- Contactor coil open or shorted medium
- Damaged wiring or corroded connector in the contactor branch medium
- Fault in the module that drives and monitors the contactor low
Symptoms
- Charging not possible or aborted
- Charging system warning in the instrument cluster
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0D0E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.