P0D0C
Battery Charging System Positive Contactor A Control Circuit Low
P0D0C stands for a control line of positive charging contactor A that reads too low, usually a short to ground or a driver output pulled down. When the coil is fed through a high-side driver, a grounded line leaves the contactor without power or overloads the driver. No manufacturer documents P0D0C publicly. GM states that its own Volt check for this contactor, P0D0A, cannot detect a short to ground, so the documented tests do not cover this case; CARB requires the charging system of plug-in vehicles to be monitored. Chafed harness sections near the battery or charge inlet and water in connectors are the usual causes. High readings are P0D0D, opens P0D0A, the negative side P0D13. The typical result is a charging session that will not start.
Possible causes
- Control wire chafed through and shorted to ground high
- Moisture in a connector creating a path to ground medium
- Shorted contactor coil low
Symptoms
- Charging does not start
- Charging system warning
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0D0C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.