OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0D08

Battery Charging System Positive Contactor A Stuck Closed

P0D08 means positive charging contactor A has stayed closed although the control module commanded it open, typically because the contacts have welded. The module notices this when voltage remains on the charging side, for instance at the charge port once a session has ended, as a Toyota patent on charge-relay sticking explains. GM stores P0D08 in the BECM of the 2023 Cadillac Lyriq; bulletin 23-NA-096 traces a joint setting with P0D0F to a software fault after an interrupted level 2 AC session and confirms it with a one-minute test charge. Stellantis lists P0D08-00 for the 2024–2025 Ram ProMaster EV with MIL and a vehicle that may not enable, remedied by BPCM reflash. The negative side is P0D0F, the opposite fault P0D09. A live inlet is a safety risk, so charging or driving gets locked out.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / 08

Possible causes

  • Contactor contacts welded, for example after switching under load high
  • Battery module software misjudging the contactor state (GM Lyriq, Ram ProMaster EV bulletins) medium
  • Driver stage or coil supply that does not switch off low

Symptoms

  • Malfunction indicator lamp and high-voltage service message
  • Charging refused
  • Vehicle may not switch to ready mode

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0D08

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication