OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0D03

Control Pilot Charging Ventilation Switch Circuit High

Here the line that drives or reports the ventilation switch reads above its valid range, which points to a short to a supply voltage or a driver stage that no longer switches. The ventilation switch is the vehicle-side element that requests charging with ventilation by loading the control pilot with roughly 270 Ω and lowering it to around 3 V. No manufacturer documents this code publicly; the closest documented test is P0D01 on the Chevrolet Volt, where GM judges the switch from the pilot voltage it produces in a self-test with the cord unplugged, and CARB requires plug-in vehicles to monitor the charging system. Low readings are P0D02, an open circuit P0D00, intermittent faults P0D04. Effects range from a stored code only to a refused charging session, depending on which switch state the fault forces.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / 03

Possible causes

  • Ventilation switch control or feedback wire shorted to a supply voltage high
  • Output stage in the charging module no longer switching medium
  • Lost ground at the switch letting the line float high low

Symptoms

  • Stored code, sometimes with a charging system warning
  • Charging refused if the switch is forced closed

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0D03

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication