OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0D01

Control Pilot Charging Ventilation Switch Range/Performance

The ventilation switch lets the vehicle request charging state D, in which a small resistor pulls the pilot down to about 3 V and the station may only deliver power with ventilation. P0D01 means this switch does not produce a plausible pilot level. GM documents the check for the Chevrolet Volt (VICM/HPC2): in a self-test with the cord unplugged and the diagnostic and ventilation switches closed, the ratio of pilot voltage to battery voltage must lie between 0.05 and 0.10 in the 2011 table, or between 0.04 and 0.10 in the 2016 and 2019 tables. 30 failed samples out of 50 at 100 ms set it as Type A, MIL after one trip; the pilot circuit and charging switch tests must have finished first. Circuit faults are P0D00, P0D02 and P0D03. If the switch really sticks closed, stations without ventilation will not supply power.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / 01

Possible causes

  • Internal fault in the VICM/charging module switching or measuring circuit medium
  • Ventilation resistor branch out of tolerance or high contact resistance medium
  • Leakage on the pilot line, for example moisture in the charge inlet low

Symptoms

  • Malfunction indicator lamp on (GM Type A)
  • Charging possibly refused at stations without ventilation

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0D01

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication