OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0CFE

Control Pilot Charging Switch A Stuck On

Stuck On describes a charging switch A that stays closed while the module wants it open, so the pilot keeps signalling a charge request. Mercedes-Benz documents P0CFE00 in the AC charger N83, whose fault text states that the charger’s internal charge-start switch does not open. A 2023 bulletin for models 206, 223 and 243 reports it after charging has finished or at the start of a timed-charging pause, only with pre-entry climate control active, together with a charging error message in the cluster; NHTSA's index lists the same bulletin for many Mercedes plug-in and electric models up to 2026. The cause there is software, cured by SCN coding, and the bulletin advises against replacing parts. Its counterpart is P0CFD, circuit faults are P0CF8 to P0CFB. Charging may not end properly or is aborted.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / FE

Possible causes

  • On-board charger software, cured by SCN coding (Mercedes-Benz N83) high
  • Charging switch or relay contacts sticking closed low
  • Control line fault holding the switch permanently on low

Symptoms

  • Charging error message in the instrument cluster after charging
  • Charging aborts at home socket, wallbox or public station
  • Fault appears mainly with pre-entry climate control active (Mercedes-Benz)

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0CFE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication