P0CFC
Control Pilot Charging Switch A Intermittent/Erratic
With P0CFC the module sees the circuit of charging switch A, which places the charge request on the pilot line, change state erratically: the signal toggles briefly or vanishes for moments, whereas lasting faults would set P0CF8, P0CFA or P0CFB. Likely triggers are a loose pin, corrosion in the charge inlet or module connector, or a chafed wire that loses contact only under vibration or temperature change. No manufacturer documents this code publicly; it follows the pattern of the pilot codes, and Ford's P0CF7 bulletins show how an insufficiently secured plug can produce such dropouts on the pilot itself. CARB requires plug-in vehicles to monitor the charging system. Because each lost charge request makes the station switch off, sessions are interrupted repeatedly and may restart on their own.
Possible causes
- Loose or spread terminal in the switch circuit connector high
- Corrosion or moisture in the charge inlet medium
- Chafed wire losing contact under vibration or temperature change low
Symptoms
- Charging interrupted repeatedly, sometimes restarting by itself
- Code returns after clearing
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0CFC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.