OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0CF7

Control Pilot Circuit Intermittent/Erratic

This code stands for a pilot signal that comes and goes or jumps between levels, typically from a loose contact in the charge inlet, a plug that is not fully latched or interference on the line. Ford documents P0CF7 on the 2021-2022 Mustang Mach-E and the 2022 e-Transit, logged by the SOBDM (secondary OBD module A), and on the 2022 F-150 Lightning by the same unit, there called BCCM, the charger control module. The bulletins link it to a charge status indicator flashing red, often alongside P0A7F from the battery controller; for the Mach-E an EVSE plug that is not properly secured is named as the trigger, and for both models the fix is new SOBDM/BCCM software. Steady opens, shorts and plausibility faults use P0CF3 to P0CF6. Charging stops now and then or is aborted.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / F7

Possible causes

  • Charger module software reacting too sensitively (Ford SOBDM/BCCM reprogramming) high
  • Charging plug not fully seated or latched in the inlet high
  • Worn or loose pilot contact in the inlet or on the charging cable medium
  • Charging station producing an unstable pilot signal low

Symptoms

  • Charge status indicator flashing red (Ford)
  • Charging stops intermittently
  • Additional warning lamp with related codes such as P0A7F

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0CF7

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication