OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0CF5

Control Pilot Circuit Low

Circuit Low means the pilot level sits under the lowest value any regular charging state can produce, as happens when the pilot wire is shorted to ground or to the protective earth contact. GM checks it in the Chevrolet Volt VICM/HPC2 tables from 2012 to 2019: with the cord unplugged, the controller feeds its own test signal through the internal diagnostic switch, and the ratio of pilot voltage to 12 V battery voltage must not fall below 0.03. 30 failures within 50 samples at 100 ms set the code as Type A, so the MIL lights after a single trip. A missing signal is P0CF3, an excessive level P0CF6, an implausible one P0CF4. While the line is pulled down, the vehicle cannot show the station that it is connected and ready, so charging does not begin.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / F5

Possible causes

  • Pilot wire chafed through and touching ground or the protective earth conductor high
  • Water or corrosion bridging pilot and earth pins in the charge inlet medium
  • Failed pilot input or test circuit in the charging control module low

Symptoms

  • Malfunction indicator lamp on (GM Type A)
  • Station does not detect the vehicle, charging never starts
  • Charge status indicator shows a fault after plugging in

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0CF5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication