OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0CF4

Control Pilot Circuit Range/Performance

P0CF4 flags a pilot signal that is electrically present but does not fit what the vehicle expects. GM spells out the test for the Chevrolet Volt (2011-2019, VICM/HPC2): with no cord connected and the car moving at 8 km/h or more, pilot voltage divided by battery voltage must stay below 0.03 and both processor logic states must agree; in a self-test with the internal diagnostic switch closed and the charging and ventilation switches open, the ratio must sit between 0.30 and 0.55. 30 of 50 samples at 100 ms set it as Type A, MIL after one trip; older tables also require the charge door to be closed. FCA names P0CF4-00 together with P0CF3 on the Pacifica Plug-in Hybrid and the Renegade/Compass 4xe and fixes it by reflash. Opens and shorts have their own codes. Charging may fail or be refused.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / F4

Possible causes

  • Faulty pilot measuring or self-test circuit inside the charging/hybrid control module medium
  • Module software needing an update (FCA Pacifica and 4xe bulletins) medium
  • Moisture or dirt in the charge inlet creating a leakage path on the pilot line medium
  • Charge door position fault blocking or distorting the test (GM Volt enable condition) low

Symptoms

  • Malfunction indicator lamp on after one trip (GM)
  • Charging refused or interrupted
  • Charge status indicator shows a fault

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0CF4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication