OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0CF2

Hybrid/EV Electronics Coolant Temperature Sensor A Circuit Intermittent/Erratic

This code catches a coolant temperature signal that jumps around faster than a liquid can actually change temperature, without necessarily leaving the valid voltage window. GM computes a string length: the controller adds up the absolute steps between four consecutive readings taken 250 ms apart. If that total exceeds 90 °C (2016 Volt, 19OBDG01) or 95 °C (16OBDG02), the window counts as failed; 4 of 5 windows, 5 of 7 windows or 1 s in a 1.25 s window then set the code, Type B, two trips. Loose terminals, a cracked solder joint in the sensor or a chafed wire that touches intermittently produce such spikes. Steady faults are P0CF0/P0CF1, a stable but wrong value P0CEF. The erratic reading can make the pump and power limits react without reason.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / F2

Possible causes

  • Loose or spread terminal in the sensor connector high
  • Chafed wire making intermittent contact with ground or another circuit medium
  • Cracked internal connection in the sensor medium

Symptoms

  • Malfunction indicator lamp, sometimes coming and going
  • Coolant temperature value jumps in live data
  • Pump speed or power limits change without reason

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0CF2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication