OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0CEB

Hybrid/EV Electronics Coolant Pump A Control Circuit Low

The control line of the electronics coolant pump sits at too low a level, typically because it is shorted to ground or the driver cannot pull it up. No manufacturer publishes setting criteria for this code. GM's 2019 HPC2 table names P0CEB only as a blocking code alongside P0CE9, P0CEC and P0CED: while any of them is active, the plausibility test of the electronics coolant temperature sensor (P0CEF) does not run. GM folds a grounded line into P0CE9 in other years, so how P0CEB is used depends on the controller. CARB requires inverter cooling components to be checked for circuit faults. The counterpart for a line stuck high is P0CEC. A shorted line can keep the pump from running, which lets the inverter and charger loop overheat and leads to power limits.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / EB

Possible causes

  • Control wire chafed through and touching body ground high
  • Pump control input shorted internally medium
  • Water or corrosion in the pump connector bridging pins to ground medium
  • Faulty output stage in the controlling module low

Symptoms

  • Malfunction indicator lamp or hybrid warning
  • Electronics coolant pump does not run
  • Power or charging limited as electronics temperatures rise

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0CEB

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication