P0CEA
Hybrid/EV Electronics Coolant Pump A Performance
Here the pump circuit is electrically intact, yet the coolant it should move does not seem to arrive. GM documents it in the VICM tables of 2014 and 2016, the latter explicitly for the Cadillac ELR: with the pump enabled above 30 % speed for more than 300 s, the controller compares the power electronics coolant temperature with the temperature of the high-voltage charger. A gap larger than a calibrated value, separate for charging and for driving, or a charger hotter than 60 °C for over 600 s while charging counts as a failure; 32 of 40 samples at 250 ms set the code, Type B, two trips. Circuit faults (P0CE9, enable line) block the test. Weak flow from air in the loop, low coolant or a worn pump is the usual background; charging and drive power are cut back to protect the electronics.
Possible causes
- Air trapped in the power electronics coolant loop after service or a leak high
- Low coolant level in the electronics loop reservoir medium
- Worn or partly blocked pump delivering too little flow medium
- Skewed coolant or charger temperature signal distorting the comparison low
Symptoms
- Malfunction indicator lamp or hybrid system message
- Charging slows down or stops, especially in hot weather
- Reduced propulsion power during long or demanding drives
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0CEA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.