P0CE8
Hybrid/EV Battery Pack Coolant Control Valve Position Sensor Circuit Intermittent/Erratic
P0CE8 stands for a valve position feedback that drops out or jumps briefly while the hard low and high limits are not violated long enough to set P0CE6 or P0CE7. Such patterns come from loose pins at the valve plug, a cracked solder joint or a worn sensor track that loses contact at certain angles. GM's 2011 Volt catches a related symptom inside P0CE0: when the summed noise of the feedback exceeds 12 %, the valve performance test fails (8 of 10 samples at 1 s). No manufacturer publicly documents P0CE8 itself; CARB's requirement to monitor battery thermal management inputs applies. Effects range from a brief warning to temporarily limited charging, often with no lasting complaint. Watching the feedback in live data while moving the connector usually reveals the fault.
Possible causes
- Loose or corroded pin in the valve connector high
- Worn sensor track losing contact at certain positions medium
- Cracked solder joint inside the actuator low
Symptoms
- Occasional warning lamp that may go out again
- Jumping valve position in live data
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0CE8
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.