P0CE7
Hybrid/EV Battery Pack Coolant Control Valve Position Sensor Circuit High
P0CE7 is the high-side fault of the battery coolant control valve position feedback. GM sets it when the signal exceeds 95 % of the reference voltage in the 2011 Chevrolet Volt (40 of 50 samples at 100 ms) or 72 % in the 2016 Cadillac ELR (640 of 800 samples at 6.25 ms), in both cases with system voltage above 9 V or 10.2 V and rated Type B, so the MIL lights on the second trip. The ELR value sits just above the highest end stop it accepts while learning (about 69.5 %). An interrupted sensor ground, a signal line shorted to the reference or to battery voltage, or a worn sensor track are typical. The coolant path can then no longer be confirmed, and thermal conditioning may be restricted. The low counterpart is P0CE6.
Possible causes
- Sensor ground wire interrupted high
- Signal wire shorted to reference or battery voltage medium
- Worn sensor track in the actuator low
Symptoms
- MIL after two trips (GM)
- Valve position shown near 100 % in live data
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0CE7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.