OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0CE5

Hybrid/EV Battery Pack Coolant Control Valve Position Sensor Circuit Range/Performance

P0CE5 means the position feedback of the battery coolant control valve is electrically valid, but the valve has not arrived where the controller sent it. In GM's 2016 Cadillac ELR tables the hybrid controller allows up to 22 s; if the feedback still shows a different position once the end-stop learn routine P1F56 has finished, 1280 of 1600 samples at 6.25 ms set a Type B code with the MIL on the second trip. In the 2011 Volt the same situation still fell under P0CE0. Causes include a valve that runs stiff because of deposits or cold, a weak actuator motor, a sensor that has moved away from its learned end stops, and air or low coolant in the loop. Battery cooling or heating then works less effectively. Circuit faults are P0CE6 and P0CE7, valve faults P0CE0 and P0CE1.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / E5

Possible causes

  • Valve stiff from deposits or low temperature high
  • Actuator motor weak or gearing worn medium
  • Position sensor drifted from learned end stops medium
  • Air or low coolant in the battery circuit low

Symptoms

  • MIL after two trips (GM)
  • Battery reaches its target temperature more slowly

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0CE5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication