OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0CE1

Hybrid/EV Battery Pack Coolant Control Valve A Stuck On

P0CE1 reports that coolant control valve A of the battery circuit remains in its active position although the controller commanded a change. Manufacturers phrase it differently: Mercedes hybrid battery management speaks of a shutoff valve that does not open, Volvo of a valve stuck on in the BECM of the XC90 T8 from model year 2016. Volvo's TJ 32903 first advised erasing the intermittent entry and test driving, a later revision a software upgrade. For the 2020 Audi Q5 TFSI e, bulletins 2059530 and 80C9 state that the temperature difference limits used to judge the valve were too tight; new software followed (also TSB 2067066). Bentley's TPI 2058049 for the Bentayga Hybrid starts with the coolant level of the battery circuit and an actuator test of changeover valve N632. P0CE0 is the opposite fault.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / E1

Possible causes

  • Monitoring limits or software too strict (Audi, Volvo updates) high
  • Low coolant level or air in the battery coolant circuit medium
  • Changeover valve mechanically stuck medium

Symptoms

  • MIL on, usually without driving symptoms
  • Battery cooled or heated longer than needed

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0CE1

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication