OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0CE0

Hybrid/EV Battery Pack Coolant Control Valve A Performance/Stuck Off

P0CE0 means coolant control valve A of the battery loop is electrically sound but does not reach or hold its commanded position. GM's 2011 Chevrolet Volt checks the four-port valve in stages: an end-stop learn, reaching the target within 1.5 s, drift above 3 % and a noisy feedback; 1280 of 1600 samples at 6.25 ms set a Type B code. GM's 2016 ELR tables use P1F56 for this. Audi stores P0CE000 in the thermal management unit of the 2020-2022 Q5 TFSI e and fixes it with new software (TSB 2067066). Mercedes reads it as a battery coolant shutoff valve that does not close. Toyota reports its RAV4 Prime fault P0CDF72, a stuck-open battery cooling valve, as SAE P0CE0 and revised the air conditioner amplifier logic (T-SB-0057-21). The opposite case is P0CE1.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / E0

Possible causes

  • Control software or limits too strict (Audi, Toyota updates) high
  • Valve sticking or actuator too weak medium
  • Position feedback drifted or noisy low

Symptoms

  • MIL on, often without other symptoms
  • Battery temperature regulation less effective

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0CE0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication