P0CD9
Hybrid/EV Battery Pack Coolant Temperature Sensor B Circuit Intermittent/Erratic
P0CD9 covers a signal from battery coolant temperature sensor B that drops out or jumps for short moments while staying inside the electrical limits most of the time. It is meant for loose terminals, chafed wires or a sensor that misbehaves only with vibration or temperature. Volvo documents ECM-P0CD900 as a permanent entry on several 2021-2022 plug-in hybrids: according to TJ 36929, charging in outside air warmer than 20 °C can light the engine lamp although nothing is broken, and software release 2024 week 34 (version 3.2.4) improves the detection; in any other situation VIDA fault tracing applies. GM does not list P0CD9 and handles the comparable erratic case for sensor A as P0C46 with a step-sum test. Hard short or open faults are P0CD7 and P0CD8.
Possible causes
- False detection after charging in warm weather (Volvo, software update) high
- Loose or corroded terminal at the sensor or module connector medium
- Chafed harness that moves with the battery or body medium
- Sensor B with an intermittent internal fault low
Symptoms
- Check engine light, often after charging
- Jumping outlet temperature value in live data
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0CD9
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.