P0CD8
Hybrid/EV Battery Pack Coolant Temperature Sensor B Circuit High
P0CD8 is the high-voltage fault of battery coolant temperature sensor B at the pack outlet. On the usual NTC circuit the signal rises to the reference when the loop is broken, so the controller sees an impossible temperature below -40 °C. The battery energy control modules of the 2011 Chevrolet Volt and 2016 Cadillac ELR use exactly this limit, an ADC count above 3823, held for 1.75 s within 2.5 s; the code is Type B with the MIL on the second trip. Connectors left unplugged after work on the battery, corroded pins, a broken wire or a short to a supply line are the common findings, an open sensor element is rarer. Until it is fixed the battery may not be heated or cooled as intended and cold-weather power can be limited. The low counterpart is P0CD7, sensor A high is P0C45.
Possible causes
- Connector of sensor B unplugged or not latched after service high
- Broken signal or ground wire, corroded terminals medium
- Signal wire shorted to a voltage source low
- Sensor element internally open low
Symptoms
- MIL on after two trips (GM)
- Outlet coolant temperature shows about -40 °C
- Limited power or charging in cold weather
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0CD8
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.