OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0CD7

Hybrid/EV Battery Pack Coolant Temperature Sensor B Circuit Low

P0CD7 reports that the signal of battery coolant temperature sensor B at the pack outlet has dropped toward ground. On an NTC thermistor with pull-up resistor a low voltage reads as very hot coolant, so a short to ground or a damaged sensor is the usual explanation rather than real overheating. GM's battery energy control module in the 2011 Chevrolet Volt and 2016 Cadillac ELR stores the code once the outlet value reaches 87.9 °C, an ADC count of 130 or less, for 1.75 s within a 2.5 s window; it is rated Type B, so the MIL lights after the second trip. While it is active, GM suspends the outlet plausibility test P0CD6 and the coolant pump checks that rely on this value. Expect reduced charging or power until the signal is back. The open-circuit counterpart is P0CD8, sensor A low is P0C44.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / D7

Possible causes

  • Signal wire of sensor B shorted to ground high
  • Sensor B internally shorted or water-damaged medium
  • Input stage of the battery control module faulty low

Symptoms

  • MIL on after two trips (GM)
  • Displayed outlet coolant temperature implausibly high
  • Charging or drive power reduced

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0CD7

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication