OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0CD3

Charge Port Door A Unlock Control Circuit Low

P0CD3 narrows the unlock output fault of charge flap A down to a low level: the monitored voltage on the actuator or relay control line stays near ground when it should be higher, which typically means a short to ground on the control wire or a failed actuator coil pulling the line down. No manufacturer documents this code publicly. GM's Volt tables of 2011 and 2012 fold the short to ground into the combined circuit code P0CD1 instead of using P0CD3. CARB 13 CCR 1968.2 (e)(15) asks for circuit checks on outputs only where emissions or other diagnostics depend on them. The GM charge port patent illustrates the actuator that this output powers. The high-side case is P0CD4, the functional test P0CD2. A driver usually finds that the flap no longer releases, and a blown fuse is possible.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / D3

Possible causes

  • Actuator control wire shorted to ground high
  • Shorted winding in the unlock actuator medium
  • Water in the actuator connector low

Symptoms

  • Charge flap does not unlock
  • Possibly blown fuse in the actuator supply

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0CD3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication