Powertrain
generic / SAE
P0CCF
Charge Port Door A Position Sensor Circuit High
The charge port door A position sensor reports a high fault. Door state cannot be verified reliably.
SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / CF
Possible causes
- Signal wire shorted to B+ high
- Open position sensor medium
- Connector pins corroded - high contact resistance low
Symptoms
- Charge status indicator shows fault
- Charging may not start or interrupts
- Slower-than-expected charge rate
Inspection / repair
- Difficulty: easy
- DIY: possible
- Estimated cost: 80–400 €
- Estimated time: 0.3–2 h
- Component: charge port door a position sensor
- Component: wiring harness
- Component: bms
- MIL / check engine light
Sources
References
sae:J2012