OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0CCC

Charge Port Door A Position Sensor Circuit

The position sensor of charge flap A tells the vehicle whether the flap is open or shut; GM has patented a version in which a magnet on the flap acts on a magnetic sensor in the housing. P0CCC is the general circuit code for this sensor. On the 2011 to 2013 Chevrolet Volt it sets when the reading lands in the invalid window of 65.9 to 81.6 percent of reference in six of eight samples, as a Type B code with the lamp after two trips. GM uses the flap state as an enable condition for the control pilot check P0CF4, which is why the sensor is part of the OBD system there; GM's 2016 hybrid table no longer lists these flap codes. Short circuits have their own codes, P0CCE (low) and P0CCF (high). The driver may see a false flap-open message or a charging refusal.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / CC

Possible causes

  • Faulty flap position sensor or switch high
  • Sensor or its harness pigtail not fully seated in the housing medium
  • Damaged wire or corroded connector in the sensor circuit medium

Symptoms

  • Flap-open message although the flap is closed
  • Warning lamp after two trips (GM Volt)
  • Charging or charge pilot checks may be blocked

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0CCC

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication