P0CC9
Charge Port Door A Open Request Switch Circuit Low
P0CC9 means the open request switch of charge flap A reads lower than any valid state, which typically results from the signal wire touching ground or from a switch that has failed short. In the Chevrolet Volt tables of 2011 to 2013, GM sets it once the reading drops under 22.9 percent of the reference in six of eight samples; the code is Type B, so the warning lamp follows after two consecutive trips. The monitor belongs to the hybrid control module 2 (VICM). The opposite fault, a reading above 94.5 percent, is P0CCA, and a value stuck between valid states is P0CC7. Because a grounded signal may look like a permanently pressed button, the flap can fail to respond or the module may stay awake longer than intended.
Possible causes
- Signal wire chafed through to body ground high
- Open request switch shorted internally medium
- Water in the switch connector creating a leakage path to ground medium
Symptoms
- Charge flap does not react to the button
- Warning lamp after two trips (GM Volt)
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0CC9
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.