OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0CC8

Charge Port Door A Open Request Switch Circuit Performance

P0CC8 covers a plausibility fault of the charge flap A open request switch: the signal is electrically within limits, yet its behaviour makes no sense, for example a button that reports pressed for far too long or never changes state over many wake-ups. No manufacturer documents this code publicly. GM's Volt tables of 2011 to 2013 monitor the same switch only for invalid range, low and high (P0CC7, P0CC9, P0CCA), so the performance check is not used there. CARB 13 CCR 1968.2 (e)(15) requires rationality checks only for inputs that affect emissions or serve another diagnostic, which explains why such comfort inputs are often left out. A GM patent shows the typical layout, in which the release button makes the controller energize the flap actuator. Expect a flap that reacts erratically to the button.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / C8

Possible causes

  • Mechanically sticking or jammed open request switch high
  • Worn switch contact giving an implausible signal medium
  • Wiring fault that keeps the signal in an unexpected state low

Symptoms

  • Charge flap opens unexpectedly or ignores the button
  • Message about the charge flap in the instrument cluster

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0CC8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication