P0CC7
Charge Port Door A Open Request Switch Circuit
P0CC7 is the general circuit fault of the button that requests opening of charge flap A. GM reads this switch as a percentage of its reference and expects defined states; on the 2011 to 2013 Chevrolet Volt the code sets when the reading sits in a forbidden band between 65.9 and 81.6 percent, which indicates a wrong resistance, for instance a damaged switch or a partly broken wire. Six bad readings out of eight (50 ms steps in 2011/2012, 500 ms in the 2013 table) trigger it, and it is a Type B code with the lamp after two trips. Hard shorts are split off into P0CC9 (to ground) and P0CCA (to battery voltage); unstable signals belong to P0CCB. In daily use the flap may ignore the button, while opening via the key or screen can still work.
Possible causes
- Open request switch with wrong internal resistance high
- Partly broken wire or corroded connector raising circuit resistance medium
- Moisture in the switch housing medium
- Faulty switch input in the control module low
Symptoms
- Charge flap does not open with the button
- Warning lamp after two trips (GM Volt)
- Opening via key, app or screen still possible on some models
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0CC7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.