P0CC0
Drive Motor A Coolant Temperature Sensor Circuit Intermittent
P0CC0 is meant for a coolant temperature signal of drive motor A that drops out or jumps for short moments. No manufacturer documents this code publicly. GM's 2013 eAssist table, the most detailed public source for this sensor, monitors it only with P0CBD for plausibility and P0CBE/P0CBF for out-of-range values; Volvo and Polestar report P0CBC with failure type 62. CARB section (e)(15.2.1) asks for circuit and range faults of inputs to be detected, and (e)(15.2.3)(B)(ii) extends this to the cooling of the inverter. A sporadic code typically stems from a loose terminal, a chafed wire that touches metal only on bumps, or water in the connector. Since the reading normally recovers, the lamp may go out again; live data recorded during a drive help to catch the moment of the fault.
Possible causes
- Loose or spread terminal in the sensor connector high
- Chafed wire making contact only on bumps medium
- Moisture in the connector low
Symptoms
- Warning lamp that appears and disappears
- Jumping coolant temperature value in live data
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0CC0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.