OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0CBB

Hybrid/EV Battery Temperature Sensor P Circuit Intermittent/Erratic

P0CBB is about short dropouts or spikes in the signal of sensor P that do not last long enough, or go far enough, to trip the low or high code. GM defines it in the HPC2 tables 16OBDG02 to 19OBDG02 and judges how restless the signal is: within each window of ten samples taken 100 ms apart the size of every change is added up, a total above 10 fails the window, and four bad windows in five produce the code, Type B, two trips. Enable conditions are more than 10.2 V and communication with the battery interface module. Neither the 2011/2012 Volt tables nor Mitsubishi know this fault type for sensor P. An intermittent contact often shows up only with vibration or temperature change, so the freeze frame and a road test with live data matter more than a static resistance check.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / BB

Possible causes

  • Intermittent contact at the sensor P plug high
  • Hairline crack in the sensing board near the sensor P input medium
  • Unstable reference or ground of the monitoring unit low

Symptoms

  • Intermittent warning that may clear by itself
  • Erratic sensor P reading in live data

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0CBB

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication