OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0CB7

Hybrid/EV Battery Temperature Sensor P Circuit

P0CB7 covers an electrical fault of battery temperature sensor P that the controller cannot pin down as low, high or intermittent. No manufacturer lists this code on a public official server. In GM's 2011 Volt rationality table P is the sixteenth and last sensor, and GM gives it only P0CB8 to P0CBB; Mitsubishi's Outlander PHEV treats P as module sensor [15] with rationality, short and open codes. In this block P is the final sensor letter, the next code P0CBC already concerns drive motor cooling. CARB requires the battery temperature sensors to be monitored under section (e)(15.2.3)(A)(iv), with circuit faults and range violations to be told apart per (e)(15.2.1). A missing value of P makes the battery controller act cautiously and lower power. Checking means opening the de-energised pack.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / B7

Possible causes

  • Loose or corroded plug of sensor P high
  • Damaged wiring of sensor P inside the pack medium
  • Measuring channel for sensor P in the monitoring unit faulty low

Symptoms

  • Hybrid or EV warning message
  • Limited electric power until repaired

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0CB7

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication