OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0CB6

Hybrid/EV Battery Temperature Sensor O Circuit Intermittent/Erratic

P0CB6 targets a sensor O signal that jitters or jumps instead of changing smoothly. Only GM's later HPC2 tables (16OBDG02 to 19OBDG02) define it: every 100 ms a sample is taken, the absolute steps between ten consecutive samples are summed, and a sum above 10 marks that window as failed. Four failed windows out of five set the code as Type B, so the lamp follows on the second trip; the test needs more than 10.2 V and a working link to the battery interface module. The earlier Volt tables of 2011 and 2012 had no such code for O, and Mitsubishi uses none for its pack sensors. Because the reading can stay inside the valid band, P0CB4 and P0CB5 may never appear. Shaking the harness while watching live data, and the freeze-frame record, help to find a fretting contact or cracked solder joint.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / B6

Possible causes

  • Fretting or loose terminal in the sensor O circuit high
  • Cracked solder joint or trace on the sensing board medium
  • Chafed lead touching ground only under vibration low

Symptoms

  • Warning lamp that comes and goes
  • Sensor O value jumping in live data

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0CB6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication