OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0CAE

Hybrid/EV Battery Temperature Sensor N Circuit Range/Performance

P0CAE is the plausibility check for sensor N: the value is electrically acceptable, yet out of line with its neighbours. GM's 2012 Volt table 12OBDG01A demands a rest of more than 21,600 s without propulsion, external charging or thermal conditioning and then fails the test at a deviation above 25.3 °C in 50 of 67 samples, Type B. The 2019 table 19OBDG02 keeps the count but uses 25.00 °C, 25 ms sampling and a minimum supply of 10.2 V. Mitsubishi's 2022 Outlander PHEV applies the code to module sensor [13] and checks it once per drive cycle after a one-hour soak: 13 °C or more away from the 50-sensor mean for 0.32 s. Electrical faults of N are reported separately as P0CAF and P0CB0.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / AE

Possible causes

  • Thermistor N reading off while electrically valid high
  • Sensor N detached from its cell or module surface medium
  • Real temperature difference in that pack section low

Symptoms

  • Warning lamp after the car has stood for hours
  • Limited battery power

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0CAE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication