P0CA2
DC/DC Converter Step Down Voltage Performance
P0CA2 means the step-down function of the DC/DC converter, which brings high-voltage battery power down to the 12 V network, is not working correctly. GM's 2013 eAssist table 13OBDG05C uses it for a shoot-through fault inside the 14 volt power module: if the module detects a failed silicon power switch, a single 25 ms detection at 9 to 32 V sets the code as Type A, so the MIL lights on the first trip. Documents GM supplied to NHTSA in recall query RQ13-003 on the 2013 Malibu mild hybrid show P0CA2 in dealer cases together with P0562 for low system voltage, power pack replacements, and engineering reviews of returned parts with no fault found. P0CA3 is the step-up counterpart. Without the converter the 12 V battery drains.
Possible causes
- Failed power semiconductor in the converter's step-down stage high
- Internal fault of the power module or power pack assembly medium
- Spurious detection without a hardware fault, for example after supply dips low
Symptoms
- Check-engine lamp on the first trip, often with a charging warning
- Falling 12 V voltage, low-voltage codes such as P0562
- Hybrid assistance or auto-stop unavailable
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0CA2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.