P0CA1
Drive Motor Control Module Requested MIL Illumination
P0CA1 is a request code, not a component fault: the drive motor control module has detected an emissions-relevant fault of its own and asks the engine control module to light the MIL, which stores P0CA1. Subaru documents this on the 2014 XV Crosstrek Hybrid in bulletin 07-82-14R: P0CA1 sits in the engine module and C1424 in the stability control module, both MIL requests comparable to P0700. They usually accompany the drive motor module codes P0CDD and P0A3F, which set when the 12 V auxiliary battery voltage drops; with those codes in history, reprogramming the drive motor module is the fix, and Subaru changed its logic in production from January 2014. If only P0CA1 and C1424 are present, diagnose per the service manual.
Possible causes
- Emissions-relevant fault stored in the drive motor control module high
- Module software reacting to a low 12 V battery (Subaru 07-82-14R) medium
- Weak or discharged 12 V auxiliary battery medium
Symptoms
- Check-engine lamp, often with further warning lamps such as stability control
- Hybrid drive behaving normally or with reduced electric assistance
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0CA1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.