OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0CA0

14 Volt Power Module Current Sensor B Circuit Intermittent

P0CA0 covers short dropouts or spikes in the signal of current sensor B, the output-side sensor of the 14 V power module (DC/DC converter) in GM's numbering. Between the events the reading looks normal, which separates it from the hard low and high faults P0C9E and P0C9F. No manufacturer documents P0CA0 publicly; GM's eAssist table only lists fixed limits for this sensor, below 2 A and above 123 A, each judged over 1.5 s in 2 s, and the cross-check P0CC5. CARB paragraph (e)(15.3.1) still expects such inputs to be monitored without pause. Vibration, a loose module connector, corroded grounds or poor 12 V cable connections are the first things to inspect; freeze-frame data helps to catch the moment.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / A0

Possible causes

  • Loose or fretting connector at the power module high
  • Corroded ground or 12 V output connection medium
  • Current sensor B failing intermittently inside the module low

Symptoms

  • Warning lamp that comes and goes
  • Occasional dim lights or voltage messages

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0CA0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication