OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C9D

14 Volt Power Module Current Sensor B Circuit Range/Performance

P0C9D means the output current reported by sensor B of the 14 V power module is electrically valid but implausible for the operating state. No manufacturer documents this code publicly. GM's 2013 eAssist table checks this kind of plausibility through the correlation code P0CC5 instead: the output power derived from sensor B is compared with the input power from sensor A multiplied by an efficiency factor between 0.90 and 0.99, and a gap above 0.4 kW for 3.75 s within 5 s sets it, Type B. That test is blocked while P0C9E or P0C9F is active. A sensor with offset or gain drift is the usual reason, rarely a converter whose real output deviates. The driver may notice only a warning lamp or a 12 V battery that stays low.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 9D

Possible causes

  • Offset or gain drift of current sensor B high
  • Converter output really differing from the commanded power low
  • High resistance at the 12 V output cable or ground medium

Symptoms

  • Warning lamp without obvious driveability change
  • 12 V battery charge state remaining low

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C9D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication