P0C93
Hybrid/EV Battery Temperature Sensor K Circuit Range/Performance
P0C93 compares sensor K with its neighbours: the reading is electrically fine but too far from the pack average. GM's 2016 hybrid table 16OBDG02 sets it when the absolute difference exceeds 25.00 °C for 50 samples out of 67 taken every 25 ms, roughly 1.7 s, rated Type B; the check is suspended whenever a low, high or erratic code for the battery sensors is active. GM's 2011 table lists K as sensor 11. Mitsubishi handles it on the 2018 Outlander PHEV as a rationality fault of sensor [10]: it needs 3,600 s of soak, a pack temperature from −30 to 60 °C and a 13 °C deviation lasting 0.32 s, tested once per drive. A thermistor that drifted or lost contact with its cells is the typical finding.
Possible causes
- Thermistor K reading off while still electrically valid high
- Sensor K lifted off its cell group medium
- Real temperature spread from uneven coolant flow or a weak cell low
Symptoms
- Warning lamp, often first noticed after a cold start
- Charging and discharging power limited
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C93
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.